Karlskrona Night Lamp Brass
Karlskrona Night Lamp Brass
¥15,400 (tax included)
Karlskrona Lampfabrik was founded in 1884 in a port town in southern Sweden.
They have long produced high-quality burners, mainly of the roller-wick type. Despite its compact size, this handy "Night Lamp" offers surprisingly bright light, gently and elegantly illuminating a table.
The body is brass. We offer it as a polished Brass finish, as well as Nickel and Copper versions with nickel plating and copper plating, respectively.
Using an electricity-free light, even just for special occasions, can also be helpful in an emergency.
Made in Sweden
In stock
Size: Height approx. 230mm, Diameter 105mm, Width including handle approx. 120mm
Brightness: 55 lumens
Burn time: 17 hours
Tank capacity: 300cc
Fuel: Kerosene or white kerosene
*About usage
From items received starting in 2025, the wick has become slightly thinner, making it a bit lighter to raise and lower. However, the gear mechanism is very delicate, so please do not force it or raise/lower it unnecessarily. Doing so can cause a malfunction.
Because air can easily enter through the burner, this lantern is not suitable for use outdoors in strong wind.
*About Fuel
The fuel we recommend is inexpensive kerosene available at gas stations, or white kerosene that can be purchased online. Many other widely available lamp oils (paraffin oils) can also be used, but for lamps that draw fuel up through a wick to burn, oils with a higher viscosity or flash point may not burn well in some cases. For outdoor use, we recommend a kerosene (white kerosene) that performs well in cold weather and burns brighter.
A relatively stable lamp oil that we have tested in-house is Kameyama Paraffin Oil (Clear).
*About Quality and Design
Because of how the burner and tank are threaded together, the position of the burning handle extending from the side of the burner may not always match what is shown in the photo.
Because the threaded section mentioned above and the burner body itself are made of soft brass, some units may be slightly tilted.
Minor scratches or dents on the bottom surface, as well as brazing marks, are not eligible for return.
Fading or slight pinpoint marks caused by oxidation of the plating are not eligible for return.
Because the construction is classic and handmade, we ask that customers who want a flawless product refrain from purchasing.
You may also like…
