Vapalux Lantern 300 Stainless Steel
Vapalux Lantern 300 SB
¥55,000 (tax included)
Carrying on the craftsmanship of Britain's Wills & Bates, established in 1912, each lantern is carefully handmade one at a time.
Runs on kerosene, a fuel that is both safe and economical. Preheating uses alcohol but is simple — about 30 to 40 pumps are enough for plenty of light. The frame and tank are made of stainless steel that resists rust and keeps its shine, and a matching stainless steel light shade is available.
Burns for approximately 10 hours, so you won't need to carry extra fuel even for a two-night camping trip. Parts wear evenly and the lantern disassembles easily. Note: the included instruction manual is in Japanese.
In stock
Size: Height 345mm
Fuel: Kerosene (1L tank capacity)
Burn time: approx. 10 hours
Brightness: Approx. 60W equivalent
Included: 1 mantle (pre-installed), Japanese instruction manual
Always keep the lantern burning at full brightness. Do not continue operating it in a dim state, such as by lowering the pressure.
The total pump count is usually no more than about 40 strokes (when full). Over-pumping shortens the life of the vaporizer, so please be careful.
If storing the lantern with fuel still inside, loosen the pressure regulator knob.
Note: The cut edge of the glass chimney is smoothed by hand, so some pieces may have slightly uneven, wavy spots.
Note: Minor specification changes may be made without notice, so the item may differ slightly from the photos; this is not grounds for return. If this concerns you, please contact us before ordering.
"How a Kerosene Lantern Works"— please be sure to check it out too.
You may also like…
